All Projects

Drill new well

Seal irrigation well 436711 and extend casing on well 458529

Investigate 1970 well integrity and disinfection of well

Purchase and install generator

Purchase and connect a portable diesel generator as a back up for if power fails at Well #6

Install security cameras at the North Buffalo well field (Moorhead Well 11), unique well No 511085, Duct plowing and boring, innerduct and fiber optic cable installed between two well houses, and install ethernet switches to facilitate communication betwe

Direct connection of the city's generator to the city's wellhouse. Install 400 amp. 3 phase automatic transfer switch.

Drill a new well to improve pressure in the system.

Complete electrical work and install concrete pad for generator.

Seal two wells A-10; 731125 and B-1; 796420

Install arsenic removal system

Purchase and install flow meter and associated equipment/programming and port; Excavate, install conduit, backfill and landscape

Install security fence and lockable gate around well house number 3

Rewire 6 wells generator plugs; Install new 100 amp wire generator, receptacles and wire system to manual transfer switch

Seal two wells

Purchase and install backup generator and equipment for well and reservoir

Upgrade SCADA to ensure safety and security for wells

Remove underground 10,000 gallon fuel oil tank to protect wells within the DWSMA

Seal municipal well #2 and remove pipe and pump so it will not be a dead line entry to pressure tank.

Provide second half of rent payment to landowner to allow city to implement nitrogen BMPs on field. Planting custom seed rye to scavenge up the residual nitrogen in the soil to keep it from getting into groundwater.

Irrigate its clarified effluent from Lime storage pond #6 instead of discharging to Mississippi River

Seal and grout 4 wells

Drill a new well and seal well #5

Purchase a GPS unit to verify unknown wells in the DWSMAs, verify and locate wells. Create inventory of wells within the DWSMAs to integrate into city mapping.

Video log well 3 to get exact well and casing depth; Build and display DWSMA map for the city's residents.

Prepare two well casings for sealing. Seal two unused wells within the DWSMA. Present an educational opportunity to Anchor Bay Park residents.

Purchase generator. Send Well owners brochure.

Install treatment for groundwater

Drill and construct a new well

Well construction

Clear well #1 and televise well for possible casing flow allowing for presence of VOC's in water; Create and mail Enbridge the DWSMA to inform them that the pipeline runs through the DWSMA

Drill a new well and seal well No. 265966

Drill a new well

Drill new well to replace surface water system and seal unused well

Well abandonment with grout. Mobilization of equipment

Drill a new well and seal well that can't be converted

Construct new well, seal two wells, unique well numbers 258480 and 258481

Drill and install 4 above grade monitoring wells.

Construction of a new well and seal 2 non-compliant wells located on each property.

Abandon and seal 3 industrial wells