To hire a qualified and experienced HVAC engineer to evaluate the current system in preparation for better control of the Northfield Historical Society museum environment.
To implement recommendations from an HVAC evaluation that will ensure better climate control for the preservation of historic resources documenting Itasca County history.
To hire a qualified consultant to perform an assessment of Lac qui Parle Historical Society's heating, ventilating, and air conditioning (HVAC) system.
To hire a qualified and experienced Heating, Ventilating, and Air Conditioning (HVAC) engineer to evaluate how well the current system controls the museum environment.
To hire a qualified consultant to perform an assessment of White Bear Lake Area Historical Society's heating, ventilating, and air conditioning (HVAC) system at the White Bear Lake Armory.
To hire a qualified and experienced HVAC engineer to evaluate the current system in preparation for better control of the Kanabec County Historical Society museum environment.
An interpretive exhibit was created with table displays using historically factual text and illustrative photographs and a short play was developed to tell the story of how the dam was built and its affect on the local people and economy. The exhibit counters negative impressions about the dam and provides little known information to the public.
The lab will analyze stable isotopes oxygen-18 and deuterium in water samples collected in streams, lakes, wetlands, groundwater, and point sources. This data can identify primary flow sources under varying flow conditions (low to very high flows). Identifying sources can help identify pollutant sources or locate areas that are in need of protection. For example, you may want to protect an area that contributes cold groundwater to a coldwater fishery. Or it could link a water chemistry impairment to a specific source.
The goal of this project is to continue the development of Hydrologic Simulation Program FORTRAN (HSPF) model application tools and improve and expand the effective application of HSPF models. The tools involved in this work include HPSF and Scenario Application Manager (SAM).
This project will continue HSPF watershed model construction beyond the initial framework development. The consultant will add representation of point source discharges to the model. The consultant will also compile flow data for the purposes of calibration and validation. Finally, an initial hydrologic calibration will be performed and submitted for approval.
This project will complete a guidance document for the construction of Hydrologic Simulation Program FORTRAN (HSPF) watershed models which are intended to support MPCA Watershed programmatic activities. It will also customize and populate a national HSPF parameter database with values from Minnesota HSPF model applications. This enhanced database will expedite the future construction of HSPF models as well as increase the consistency among HSPF model applications in Minnesota.
The goal of this project is to continue and finalize Hydrological Simulation Program FORTRAN (HSPF) watershed model construction and complete the calibration/validation process for the Minnesota River–Headwaters and Lac qui Parle watersheds that can readily be used to provide information to support conventional parameter Total Maximum Daily Load (TMDL) reports.
The goal of this project is to continue and finalize Hydrological Simulation Program FORTRAN (HSPF) watershed model construction and complete the calibration/validation process. The consultants will produce HSPF watershed model applications for the Lake Superior North and Lake Superior South watersheds that can readily be used to provide information to support conventional parameter Total Maximum Daily Load (TMDL) projects.
This project will finalize the guidance document to ensture consistency and validity of future Hydrological Simulation Program FORTRAN (HSPF) model applications within the State of MN. This improved guidance will help to ensure consistency and validity of future HSPF model applications within the State as part of the One Water Program.
This project will support the development, enhancement, and support of the statewide Minnesota Pollution Control Agency Hydrologic Simulation Program – Fortran (HSPF) Model Repository, HSPEXP+ (enhanced expert system for HSPF model calibration), HCALC (HSPF Calibration Control), HTEXT (HSPF Timeseries Extension), Scenario Application Manager (SAM), and Preprocessing Application Translator for HSPF (PATH).
The goal of this project is to continue the development of Hydrologic Simulation Program FORTRAN (HSPF) model application tools improve and expand the effective application of HSPF models.
This project will address the numerous recommendations included in the original Guidance Document to provide an updated and improved Guidance Document. This improved guidance will help to ensure consistency and validity of future HSPF model applications within the State as part of the One Water Program.
This project will construct, calibrate, and validate two Hydrologic Simulation Program FORTRAN (HSPF) watershed models. The consultant will produce HSPF models that can readily be used to provide information to support conventional parameter Total Maximum Daily Load (TMDLs) at the Big Fork River and Little Fork River watersheds.
This project will complete spatial and temporal revisions of 6 Hydrologic Simulation Program FORTRAN (HSPF) models, the recalibration and validation of 7 watershed HSPF models, and the revision of the drainage network and point source representation of the Pomme de Terre HSPF model.
The goal of this project is to develop a watershed-scale decision support tool, Scenario Application Manager (SAM), to facilitate prioritization and placement of best management practices (BMPs) needed to achieve the necessary reductions identified by various watershed management programs in Minnesota. SAM consists of a Geographic Information System (GIS) for site selection, and Hydrological Simulation Program – Fortran (HSPF) model application to simulate the transport of pollutants.
The goal of this project is to refine the segmentation, extend the simulation period, and recalibrate an existing Hydrologic Simulation Program FORTRAN (HSPF) watershed model for the Rum River Watershed.
The goal of this project is to develop the guidance needed for water quality parameter evaluation and calibration for Hydrological Simulation Program – FORTRAN (HSPF) applications that utilize the general water quality constituent routines on the land surface to generate loadings of nutrients and organic material for input to water bodies to support dissolved oxygen (DO), nutrient, and algal simulation.
This project is for constructing, calibrating, and validating a Hydrologic Simulation Program FORTRAN (HSPF) watershed models for the Minnesota portions of the Des Moines Headwaters, Lower Des Moines, and East Fork Des Moines watersheds. The model can be used to provide information to support conventional parameter Total Maximum Daily Load (TMDL) reports. This model generates predicted output timeseries data for hydrology, sediment, nutrients, and dissolved oxygen that are consistent with observed data.
Development of Target NPS loading rates along with a pollutant source allocation tool for assessing and quantifying source allocations for impaired stream reaches for use in the TMDL development.
The goal of this project is to extend the existing HSPF models through 2012 in the Chippewa Watershed (07020005) and Hawk-Yellow Medicine Watershed (07020004) to incorporate recent monitoring data to support current MPCA business needs and sediment source investigations.
The goal of this project is to construct, calibrate, and validate two Hydrologic Simulation Program FORTRAN (HSPF) watershed models: Lake Superior North and Lake Superior -South. The contractor will produce HSPF models that can readily be used to provide information to support conventional parameter Total Maximum Daily Loads (TMDLs). The contractor will clearly demonstrate that these models generate predicted output timeseries for hydrology, sediment, nutrients, and dissolved oxygen which are consistent with available sets of observed data.
Construct, calibrate and validate 3 Hydrologic Simulation Program FORTRAN (HSPF) watershed models for the St Louis, Cloquet, and Nemadji River Watersheds.
Construct, calibrate, and validate three Hydrologic Simulation Program FORTRAN (HSPF) watershed models that can readily be used to provide information to support conventional parameter Total Maximum Daily Loads (TMDLs).
The goal of this work is to enhance the Scenario Analysis Manager (SAM) tool. These enhancements will enable point source and stressor identification staff within the state to quickly access data, facilitate their research, and develop scenarios. This work will focus on the development of SAM by creating a user friendly interface, expanding the BMP database, and improving the BMP simulation methodology including optimization functionality. Additionally, this work includes development of a HSPF validation tool, testing and QAQC, and provides documentation and training to expected users.
Minnesota faces many water quality and quantity challenges. State, federal and local organizations are faced with understanding hydrologic and water-quality problems and targeting cost effective solutions that are based in science. The Minnesota Pollution Control Agency (MPCA) has standardized its modeling approach for the development of the Watershed Restoration and Protection Strategies (WRAPS) and Total Maximum Daily Load (TMDL) reports required by state and federal law.
Multiple projects within west side of Hyland Park Reserve:
-Engineering and construction of 40 additional parking stalls at Richardson Nature Center
-Engineering and construction of parking lot lighting upgrades at Richardson Nature Center
-Engineering and reconstruction of 0.1 miles of paved trails at Richardson Nature Center
-Engineering and construction for mill and overlay of 2.3 acres of pavement at Richardson Nature Center and the nearby Operations Center
Replace entire rubber membrane roof on both buildings (approximately 16,500 sq. ft. combined) with new rubber membrane roofs and add fall protection as required by OSHA.
