All Projects

Drill and construct new well to replace well in the main school building.

Monitor nitrate online and SCADA interface with alarm to avoid MCL exceedance and use aerators to mix source water to improve water quality. Purchase direct current batteries to use solar power for surface mixers to aid in algae reduction.

Well and wellhouse improvement and repair.

Prepare preliminary engineering report to help identify feasibility of adding a second intake upstream of current intake.
Prepare preliminary engineering report to help identify feasibility of adding a second intake upstream of current intake.

Install arsenic treatment

Establish cover crops of key fields located near the public water supply wells.

Seal an old city of Pine City municipal well.

Install generator, conduit, wire materials, and controls. Install security cameras and recorder in water treatment plant.

Seal unused well.

City and it's residents will evaluate the possible impacts of sewer, septic systems/absorption fields, and cesspools on the City's wells, review the data and develop a plan/ evaluate options and costs to manage or mitigate this contamination source.

Identify long term solutions to the water supply issues.

Install necessary wiring to connect a generator. Mail residents city water bill notice.

Electrical work for recently purchased generator.

Install new control panel. Create an article and post at city hall.

Seal old water well adjacent to Power Plant. Purchase of 3 spill contaminant kits.

Seal 2 old city wells.

Update PCSI

Purchase electrical switch gear and generator for well site.

Purchase of spill kits for the Fire Dept. first response vehicles.

Purchase GPS technology. Purchase nitrate testing equipment.

Seal 2 unused wells in the DWSMA. Remove underground storage tank.

Locate well and seal if found. Video log well #2.

Repairing/Updating well house to code.

Purchase generator.

Seal well 3A

Construct well. Seal well.

Develop content/maps/and input material for GIS story map. WHP evaluation. Update list of storage tanks and send mailer to owners.

Prepare and mail information to owners of chemical storage and hazardous waste generator properties. Educate owners of properties and the general public about the city's Wellhead and SWP.

Refurbishing existing well and pump due to system pressure problem as advised by MDH Engineer.

Drill new well. Seal old well #260903.

Well construction. Well sealing. Hook up to existing plumbing..

Select an alternative well site.

Repair existing well. Seal old well.

Promote proper well sealing to owners. Provide fact sheets on Class V wells. Send letters to owners of active storage tanks.

Seal unused well.

Well Construction. Seal old well.

Installation of automated monitoring equipment in the city wells.

Seal old well #1 (Unique #267548) along with 2 other unnamed sandpoint wells.

Seal a unused community well just outside the DWSMA.

Determine the well location, well design, and oversight of well construction and development. Installation of an observation well.