Expand Minnetonka's groundwater level monitoring network
Pull and seal an abandon well.
Televise well #8, document condition of casing & screen and prepare a repair report for any deficiencies.
Purchase water level monitors. Provide incentives for BMP's.
Use a GIS storyboard to inform public of potential contaminates to the DWSMA. Update PCSI database.
Seal municipal well
Expand the existing groundwater level monitoring network.
Seal unused well in Parsonage
Extend casing & wire, add conduit & well cap
Investigate well and replace pitless unit and make other repairs to the well
Develop, host and maintain city website to educate residents on safety of city wells
Train and certify 4 Master Water Stewards in Stormwater best management practices to improve water quality.
Compile water quality information to update website and to print and mail information to property owners in the DWSMA.
Seal an old city of Pine City municipal well.
Purchase electrical switch gear and generator for well site.
Purchase of spill kits for the Fire Dept. first response vehicles.
Prepare and mail information to owners of chemical storage and hazardous waste generator properties. Educate owners of properties and the general public about the city's Wellhead and SWP.
PHASE TWO of sealing 8 inch City of Pine City municipal well.
Seal (1) 264-foot deep lake augmentation well formerly used at Bush Lake.
Seal private well.
SEMWAL Water Analysis
Incentive payment to landowner.
Phase 1 to set-up for a generator.
Sealing of private and old municipal wells.
Purchase back-up generator.
Seal SLP 9 unique well #206437.
Purchase GPS unit, supporting software, and training. Print large maps. Newsletter sent to owners within the DWSMA.
Purchase and install transducers at the Burr wellfield.