All Projects

Construct a new well and water service line; Seal well; unique well number 00264909

Seal up to 10 private wells within the DWSMA

Drill a new well and seal well #5

Purchase a GPS unit to verify unknown wells in the DWSMAs, verify and locate wells. Create inventory of wells within the DWSMAs to integrate into city mapping.

Video log well 3 to get exact well and casing depth; Build and display DWSMA map for the city's residents.

Prepare two well casings for sealing. Seal two unused wells within the DWSMA. Present an educational opportunity to Anchor Bay Park residents.

Install treatment for groundwater

Drill and construct a new well

Clear well #1 and televise well for possible casing flow allowing for presence of VOC's in water; Create and mail Enbridge the DWSMA to inform them that the pipeline runs through the DWSMA

Drill a new well and seal well No. 265966

Drill new well to replace surface water system and seal unused well

Drill a new well and seal well that can't be converted

Construct new well, seal two wells, unique well numbers 258480 and 258481

Abandon and seal 3 industrial wells

Remove three underground storage tanks from former Spur Gas Station

Remove, clean and dispose of three (3) underground storage tanks located at 112 East 3rd Avenue in Keewatin, MN in the DWSMA

Remove and dispose three underground storage tanks within the city's DWSMA.

Drill a new well and develop and provide article to residents about Wellhead Protection

Install backflow gear drive pump and upgrade the power in the pump house for well #2.

Install wellhead backup generator

Attempt to recover well by upgrading and repairing it; unique well number 608622. If the well recovery is not successful, seal number 608622

Purchase and install monitoring equipment and water meter

Plant native plantings and plugs in the stormwater basins located at the Perham Public Schools.

Seal well, unique well number 260742

Install natural gas line, meter, thermostat, grade and level pad and generator.

Install an arsenic removal treatment system.

Drill well to inspect well casing integrity and if casing passes inspection, well to be treated and new hand pump installed. OR Drill well to inspect well casing integrity and the casing fails the inspection. Drill a new well, install new hand pump and se

Install water treatment system and monitoring equipment

Drill test well, grout and chlorination and conduct pump test. Seal a well.

Locate and dig well; If Brandon Village test well found, seal well.

Purchase electrical switch gear and 125 amp. 3-phase natural gas fired generator for well site

Provide information on private well water safety, promotion of sealing abandoned wells within the DWSMA and information to farmers and companies about tank management.

Purchase hydrant pressure relief valves to control water system pressure when water tower is out of service.

Complete a Feasibility Analysis for CR 75 Trunk Storm Sewer project to eliminate existing infiltration basin within the Emergency Response Zone

Purchase and install permanent static water level transducers in all City wells. Prepare and distribute wellhead newsletter to all property owners in the DWSMA. Conduct water festival

Work cooperatively with MDH to select an appropriate well site and perform test drilling and water quality monitoring.

Secure a new water production source.

Install a new Reduced Pressure Zone (RPZ) valve on lines serving irrigation and stable feeding acres

Purchase a generator for Well #5 (654758)

Pull well pump (unique well number 241586) and televise the casing.