Widseth Smith Nolting (WSN) will evaluate and recommend to MPCA groundwater monitoring staff prospective sites/locations for the installation of groundwater monitoring wells to evaluate contaminant/pollutant concentrations from various sources. Peer will oversee the installation of monitoring wells by retaining a state drilling contractor or preparing bid documents to retain well driller through the Department of Administration. Superfund staff will assist in the project by providing oversight of contractual requirements and provide technical assistance as needed.
Widseth Smith Nolting (WSN) will evaluate and recommend to Minnesota Pollution Control Agency (MPCA) groundwater monitoring staff prospective sites/locations for the installation of groundwater monitoring wells to evaluate contaminant/pollutant concentrations from various sources. Peer will oversee the installation of monitoring wells by retaining a state drilling contractor or preparing bid documents to retain well driller through the Department of Administration.
The goal of this project is to develop statewide biological criteria for managing the state’s water resources, in keeping with the federal Clean Water Act. The MPCA is using the Biological Condition Gradient (BCG) for this development. The BCG is a conceptual model that describes changes in aquatic ecosystems on a gradient of increasing anthropogenic stress.
This study will test groundwater and drain tile waters at concentrated animal feedlot opperations (CAFOs) to evaluate the presence of intibiotics and hormones. Samples will be collected from monitoring wells, tile drain sumps, and tile line discharges.
Water samples will be sent to Axys Analytical Services as they are colleced from each monitoring site. A total of 18 samples will be generated in the field by pumping ultrapure water through the sampling system.
This project will provide a shared working definition and principles for civic engagement, that enable state agencies to more effectively, strategically and collaboratively manage the social dimension of Minnesota’s water resource management efforts . The agencies included in the project are BWSR, MDNR, MDA, MDH and MPCA. The consultant and project participants will develop recommendations that will better enable policy and decision makers, CWF teams, the Clean Water Council and others to make informed decisions surrounding civic engagement efforts.
This training will be for State employees who have purchased this new type of discharge measuring equipment. This training is needed to ensure that accurate and complete discharge measurements are made which is supplied to Minnesota Department of Natural Resources (DNR), Consulting firms, Local units of government, federal government and Minnesota Pollution Control Agency (MPCA) modelers.
The goal of this project is to enhance the current version of the Enhanced Expert System for Calibration of HSPF (HSPEXP+) so that it can more easily and quickly be used for hydrology calibration, water quality calibration, generate reports and graphs.
The primary goal of this project is to enhance the current version of the Expert System for Calibration of HSPF (HSPEXP+) so that it can better support hydrology calibration, water quality calibration, report and graph generation. A secondary goal of this project is to modify the Hydrological Simulation Program FORTRAN (HSPF) program so that precipitation additions to streams and lakes contain dissolved oxygen.
The lab will analyze stable isotopes oxygen-18 and deuterium in water samples collected in streams, lakes, wetlands, groundwater, and point sources. This data can identify primary flow sources under varying flow conditions (low to very high flows). Identifying sources can help identify pollutant sources or locate areas that are in need of protection. For example, you may want to protect an area that contributes cold groundwater to a coldwater fishery. Or it could link a water chemistry impairment to a specific source.
This project will address the numerous recommendations included in the original Guidance Document to provide an updated and improved Guidance Document. This improved guidance will help to ensure consistency and validity of future HSPF model applications within the State as part of the One Water Program.
This project will finalize the guidance document to ensture consistency and validity of future Hydrological Simulation Program FORTRAN (HSPF) model applications within the State of MN. This improved guidance will help to ensure consistency and validity of future HSPF model applications within the State as part of the One Water Program.
The goal of this project is to develop a watershed-scale decision support tool, Scenario Application Manager (SAM), to facilitate prioritization and placement of best management practices (BMPs) needed to achieve the necessary reductions identified by various watershed management programs in Minnesota. SAM consists of a Geographic Information System (GIS) for site selection, and Hydrological Simulation Program – Fortran (HSPF) model application to simulate the transport of pollutants.
The goal of this work is to enhance the Scenario Analysis Manager (SAM) tool. These enhancements will enable point source and stressor identification staff within the state to quickly access data, facilitate their research, and develop scenarios. This work will focus on the development of SAM by creating a user friendly interface, expanding the BMP database, and improving the BMP simulation methodology including optimization functionality. Additionally, this work includes development of a HSPF validation tool, testing and QAQC, and provides documentation and training to expected users.
The goal of this project is to develop the guidance needed for water quality parameter evaluation and calibration for Hydrological Simulation Program – FORTRAN (HSPF) applications that utilize the general water quality constituent routines on the land surface to generate loadings of nutrients and organic material for input to water bodies to support dissolved oxygen (DO), nutrient, and algal simulation.
This project will fix problems at the statewide/system level so that all Watershed Restoration and Protection Strategy (WRAPS) reports and other projects will benefit by saving money and time as they will no longer have to do data reconciliation work.
The goal of this project is to finalize the draft Lake Pepin Total Maximum Daily Load (TMDL) Report, issue it for public comment, address comments, and finalize the report. Lake Pepin is impaired by high levels of nutrients that cause excessive growth of algae. High levels of sediment, carried in by major river systems, also affect the lake. The sediment is filling in the lake at a much faster rate than before Minnesota was settled and intensely farmed. Nutrients and sediment are distinct yet inter-related pollutants, and are being addressed in separate TMDL reports.
The Minimal Impact Design Standards (MIDS) project represents the next generation of stormwater management in Minnesota. MIDS offers guidelines, recommendations and tools that help low impact development practices be implemented more uniformly across Minnesota's landscape and provides guidance to effectively implement the concepts and practices of low impact development. Products include performance goals for new development, redevelopment and linear projects, a graphic user interface calculator and flexible treatment options for sites design.
This project is to update stormwater harvest/reuse best management practices (BMPs) in the Minimal Impact Design Standards (MIDS) calculator. The update will also allow the calculator to utilize Excel files from previous of the tool.
The Minimal Impact Design Standards (MIDS) project represents the next generation of stormwater management in Minnesota. The consultant was hired to conduct research and design specifications for permeable pavement and turf.
The overall goal of this project is to further develop performance standards, design standards, or other tools to enable the implementation of low-impact development and other stormwater management techniques.
The goal of this project is to support the Stressor Identification portion of the Minnesota Watershed approach by designing a template used to develop Stressor Identification Reports for watersheds across the State of Minnesota.
The goal of this project is the development of a model of wild rice population dynamics, using RAMAS software, which mimics natural variability of population levels and calculates the probability of population extinction.
The contractor will collect and process the necessary files needed to develop a Processing Application Tool for HSPF (PATH) and Scenario Application Manager (SAM) project for 30 HUC 8 watersheds in Minnesota. SAM provides a graphical interface to the Hydrological Simulation Program FORTRAN (HSPF) model applications and expands the state’s investment in HSPF to a broader audience in support of the development of Total Maximum Daily Load (TMDL) studies and Watershed Restoration and Protection Strategy (WRAPS) reports.
The goal of this project is to develop forestry related best management practice (BMP) pollutant reduction/management efficiencies, costs, and management information applicable to Minnesota forests and incorporate these BMPs into the Hydrological Simulation Program FORTRAN (HSPF) model Scenario Application Manager (SAM) tool. By incorporating forestry BMPs into the existing SAM tool, forestry related management scenarios can be evaluated for potential impacts on surface waters and can inform the development of watershed restoration and protection strategies.
The goal of this work order is to enhance the Scenario Analysis Manager (SAM) support tool in order to represent best management practices in a more physically based manner, improve point scenario representation and analysis, and support MPCA with training in the application of the enhanced functionality.
The goal of this work order is to collect and process the watershed specific files needed to create the Scenario Application Manager (SAM) project files to apply the SAM software in selected major watersheds in Minnesota where an Hydrological Simulation Program – FORTRAN (HSPF) model has been developed. This work order will also involve technical support for the SAM users who are applying the SAM projects.
RESPEC will use the Processing Application Tool for HSPF (PATH) to construct the remaining 22 Scenario Application Manager (SAM) projects. SAM assists in understanding watershed conditions, and identifying priority areas and BMPs that will provide the greatest water-quality benefits for each dollar invested. The value of the tool is in its simplification of complex hydrologic and water quality model applications into transparent estimates of the significant pollutant sources in watershed.
The goal of this project is to provide three training sessions for the Scenario Analysis Manager (SAM) software and one training session for the Processing Application Tool for the Hydrologic Simulation Program FORTRAN (HSPF) model.
Approximately 70 percent of all Minnesotans rely on groundwater as their primary source of drinking water. Wells used for drinking water must be properly sealed when removed from service to protect both public health and Minnesota’s invaluable groundwater resources. The Minnesota Department of Health protects both public health and groundwater by assuring the proper sealing of unused wells.
Clean Water funds are being provided to well owners as a 50% cost-share assistance for sealing unused public water-supply wells.
The goal of this project is to use the Watershed Data Integration Program (WDIP) Project to apply previous experience with business analysis to the MPCA’s efforts. Develop and document implications for the strategic approach of the business to Watershed projects, their communication and implementation plans to shift to the new strategy, and the daily processes of the business that will be required to change.
The goal of this project is to update and revise the Twin Cities Metro Area (TCMA) Chloride Management Plan to a Statewide Chloride Management Plan (CMP). The Statewide CMP will provide stakeholders the information and tools necessary to improve and/or maintain water quality with respect to chloride.
The goal of this project will be to research and develop statewide winter maintenance best management practices (BMPs) for inclusion in the Statewide Chloride Management Plan and Winter Maintenance Assessment tool (WMAt). The WMAt is a necessary technical resource and planning tool for stakeholders and permittees to implement the chloride reduction strategies described in the Statewide Chloride Management Plan.
The overall goal of this process is to compile the information developed by the MPCA into summaries, tables, graphics and tools that the MPCA can use to replace sections of the Stormwater Manual. CDM Smith has developed an approach and workplan that is aimed at complimenting the knowledge of the MPCA and assisting the MPCA through supplemental literature searches, compilation of materials into usable formats, and facilitation of discussions when needed.