This program annually evaluates a sample of up to ten Clean Water Fund restoration projects, provides a report on the evaluations in accordance with state law and delivers communications on project outcomes and lessons learned in restoration practice.
Provides grants to Soil and Water Conservation Districts that focuses on increasing capacity to address four resource concern areas Soil Erosion, Riparian Zone Management, Water Storage and Treatment, and Excess Nutrients.
Governor Mark Dayton's landmark buffer initiative was signed into law in 2015. The law establishes new perennial vegetation buffers of up to 50 feet along rivers, streams, and ditches that will help filter out phosphorus, nitrogen, and sediment. The new law provides flexibility and financial support for landowners to install and maintain buffers.
For grants to Soil and Water Conservation Districts to ensure compliance with riparian buffer or alternate practice requirements for state required buffers and soil erosion law.
The goal of this project is to enhance the current version of the Enhanced Expert System for Calibration of HSPF (HSPEXP+) so that it can more easily and quickly be used for hydrology calibration, water quality calibration, generate reports and graphs.
The lab will analyze stable isotopes oxygen-18 and deuterium in water samples collected in streams, lakes, wetlands, groundwater, and point sources. This data can identify primary flow sources under varying flow conditions (low to very high flows). Identifying sources can help identify pollutant sources or locate areas that are in need of protection. For example, you may want to protect an area that contributes cold groundwater to a coldwater fishery. Or it could link a water chemistry impairment to a specific source.
The goal of this project is to develop the guidance needed for water quality parameter evaluation and calibration for Hydrological Simulation Program – FORTRAN (HSPF) applications that utilize the general water quality constituent routines on the land surface to generate loadings of nutrients and organic material for input to water bodies to support dissolved oxygen (DO), nutrient, and algal simulation.
The goal of this project is to finalize the draft Lake Pepin Total Maximum Daily Load (TMDL) Report, issue it for public comment, address comments, and finalize the report. Lake Pepin is impaired by high levels of nutrients that cause excessive growth of algae. High levels of sediment, carried in by major river systems, also affect the lake. The sediment is filling in the lake at a much faster rate than before Minnesota was settled and intensely farmed. Nutrients and sediment are distinct yet inter-related pollutants, and are being addressed in separate TMDL reports.
This project is to update stormwater harvest/reuse best management practices (BMPs) in the Minimal Impact Design Standards (MIDS) calculator. The update will also allow the calculator to utilize Excel files from previous of the tool.
The objective of this project is to build on previous efforts aimed at determining the public health risk due to virus contamination in Minnesota groundwater. The Minnesota Department of Health will examine the occurrence of viruses in non-disinfecting groundwater sources in Minnesota as well as evaluate the association between source water virus occurrence and community acute gastrointestinal illness.
This project supports monitoring and assessment activities by Minnesota Pollution Control Agency (MPCA) Environmental Outcomes staff and includes lab analysis, equipment, fieldwork, data management, and interpretation expenses associated with monitoring and assessment activities. The ambient groundwater monitoring network describes the current condition and trends in Minnesota's groundwater quality.
The Clean Water Council was created through the Clean Water Legacy Act (Minn. Stat. Ch 114D) which was signed into law June 2, 2006. The council’s role is to advise on the administration and implementation of the Clean Water Legacy Act. See the Council’s FY18-19 Clean Water Fund and Policy Recommendations Report (December 1, 2016). The 28-member Clean Water Council (Council) represents organizations with a major role in achieving clean water, enabling consensus building and coordination on a wide array of issues critical to the people of Minnesota.
This project will evaluate best management performance and effectiveness to support meeting total maximum daily loads; develop standards and incorporate state of the art guidance using minimal impact design standards as the model; and implement a knowledge and technology transfer system across local government, industry, and regulatory sectors.
Staffing support to evaluate the performance of existing stormwater infiltration sites, as identified in the Minimal Impact Design Standards (MIDS) project. Monitor the range of existing infiltration devices in Minnesota and compare to design criteria, maintenance records, and quantify year-round infiltration rates. Develop and refine pretreatment options and standards for municipal stormwater treatment.
This project supports activities by Minnesota Pollution Control (MPCA) Watershed Division staff that provide technical assistance, project oversight, coordination, outreach and other agency activities associated with assessing, listing and conducting Total Maximum Daily Load (TMDL) studies throughout the State of Minnesota. Project also includes lab analysis, equipment, and fieldwork expenses associated with TMDL work at the MPCA.
This project supports monitoring and assessment activities by Minnesota Pollution Control Agency (MPCA) Environmental Outcomes staff and includes lab analysis, equipment, and fieldwork expenses associated with monitoring and assessment activities within the described priority watersheds. Lake Monitoring: Lakes are monitored for nutrients, clarity and other information to provide the data needed to assess the aquatic recreation use support. Biological and Water Chemistry Stream Monitoring: Monitoring to assess the conditions of streams in each watershed.
The Minnesota Pollution Control Agency (MPCA) uses a watershed-oriented approach to assess surface water quality and define restoration and protection measures. Each of Minnesota's 81 major watersheds is assessed intensively every 10 years, based on a staggered schedule that addresses, on average, eight watersheds per year. To increase the amount of data directly available to the public online, and to make internal operations more efficient, the MPCA started a multi-year Watershed Data Integration Project (WDIP).
The contractor will collect and process the necessary files needed to develop a Processing Application Tool for HSPF (PATH) and Scenario Application Manager (SAM) project for 30 HUC 8 watersheds in Minnesota. SAM provides a graphical interface to the Hydrological Simulation Program FORTRAN (HSPF) model applications and expands the state’s investment in HSPF to a broader audience in support of the development of Total Maximum Daily Load (TMDL) studies and Watershed Restoration and Protection Strategy (WRAPS) reports.
The goal of this project is to develop forestry related best management practice (BMP) pollutant reduction/management efficiencies, costs, and management information applicable to Minnesota forests and incorporate these BMPs into the Hydrological Simulation Program FORTRAN (HSPF) model Scenario Application Manager (SAM) tool. By incorporating forestry BMPs into the existing SAM tool, forestry related management scenarios can be evaluated for potential impacts on surface waters and can inform the development of watershed restoration and protection strategies.
The goal of this work order is to collect and process the watershed specific files needed to create the Scenario Application Manager (SAM) project files to apply the SAM software in selected major watersheds in Minnesota where an Hydrological Simulation Program – FORTRAN (HSPF) model has been developed. This work order will also involve technical support for the SAM users who are applying the SAM projects.
The goal of this project is to update and revise the Twin Cities Metro Area (TCMA) Chloride Management Plan to a Statewide Chloride Management Plan (CMP). The Statewide CMP will provide stakeholders the information and tools necessary to improve and/or maintain water quality with respect to chloride.
The goal of this project will be to research and develop statewide winter maintenance best management practices (BMPs) for inclusion in the Statewide Chloride Management Plan and Winter Maintenance Assessment tool (WMAt). The WMAt is a necessary technical resource and planning tool for stakeholders and permittees to implement the chloride reduction strategies described in the Statewide Chloride Management Plan.
This project will conduct on-going sampling and lab analysis for suspended sediment concentration at select sites. It will also develop real-time continuous suspended sediment concentration measurements using turbidity and Acoustic Doppler Velocity Meter sensors, data analysis and draft United States Geological Survey (USGS) Scientific Investigations Report, and comparison of sampling and laboratory methods for total suspended solids and suspended sediment concentrations.
The goal of this project is to develop guidance for water quality parameter evaluation and calibration for Hydrological Simulation Program FORTRAN (HSPF) applications focused on dissolved oxygen (D.O.), nutrient, and algal simulation, along with a demonstration of the guidance by step-by-step application to D.O.-impaired Minnesota watersheds.
The goal of this project is to maintain and make enhancements to the Winter Maintenance Assessment tool (WMAt), which is a necessary technical resource and planning tool for stakeholders and permittees to implement the chloride reduction strategies described in the Chloride Management Plan.